Join our Rigger and Signalman Course to become proficient in load handling and communication. Master safe lifting, hazard identification, and more.
PRST | WSQ Perform Rigger and Signalman Tasks is a course designed to train individuals in preparing and tying loads for safe lifting by any form of lifting equipment. It also teaches the use of correct signals to guide crane operators safely. Participants will master safe lifting techniques, hazard identification, and effective communication during lifting operations.
The Perform Rigger and Signalman Tasks Course (PRST) also known as the rigger and signalman course is designed to provide you with the knowledge and skills necessary to prepare and tie loads for safe lifting by any form of lifting equipment, using correct and clear signals to guide the crane operator in maneuvering the load safely to its destination
English
Tamil
Bengali
Prepare to perform rigger and signalman tasks
Participate in risk assessment and lifting plan briefing for lifting operations as a rigger
Identify risks of lifting operation related to rigger and signalman at work site
Determine the Centre of Gravity of regular and irregular loads
Conduct pre-lift inspection of the crane, lifting gear and accessories
Select appropriate rigging equipment, lifting gears and accessories for lifting the load
Check the serviceability of communication equipment and radio
Set up communications equipment and radio channels for safe lifting operations
Practice good housekeeping of communication equipment, crane lifting gear and accessories
Report any abnormalities/ defects in the crane, lifting gear, accessories and communication equipment according to standard operating procedures
Perform rigger and signalman tasks
Observe and apply safety practices and hazard work site when carrying out rigger and signalman tasks
Identify hazards related to lifting operations
Use of PPE and tag line to carry out rigger and signalman tasks
Select and use appropriate slinging method, rigging equipment, lifting gears and accessories on load
Check to ensure an adequate number of lifting gears to lift the load
Verify that load is properly rigged
Apply 3-step lifting and lowering method
Direct load to destination with safe lifting techniques
Communicate lifting instructions using standard hand and voice signals
Check for blind spots and estimate clearance of swing path
Reinstate rigger and signalman work area
Dismantle rigging equipment, lifting gears and accessories
Carry out housekeeping of equipment and work area
Carry out post-operational checks on communication equipment, crane lifting gear and accessories
Report any damage and defects on communication equipment, crane, lifting gear and accessories
The Perform Rigger and Signalman Tasks Course is suitable for aspiring and experienced individuals assigned as Rigger and Signalman in the workplace.
Above 18 years of age.
Basic knowledge of the relevant work sector.
Proficiency in English (both written and spoken).
Numerical proficiency equivalent to ES level 2.
Medically fit.
Written & Practical Assessment
1 hour written test & 0.5 hours practical assessment
Passing Criteria
60% for written test, 100% competency in practical assessments.
Assessment Venue
SCAL Academy
164 Gul Circle #01-14 JTC Space @Gul, (S) 629621
Statement of Attainment (SOA) for competent candidates.
SCAL Members: $232.00
Non-Members: $305.60
Note: Starting June 30, 2024, SCAL Academy will no longer accept cash or cheque payments. Please use credit/debit cards, bank transfers, GIRO or PayNow for payments.
Singaporeans and Permanent Residents (PRs) are eligible for up to 70% SSG Funding for this course.
2.0 Day Course
Training Hours – 17.5 hours
Assessment Hours – 0 hours
English
Tamil
Bengali
Training provider will submit trainee details via SSG Training Provider Gateway and will bill in NETT fee if trainee is eligible for training grant. Note that all grants are subject for final approval by SSG.
Course Fee (Incl GST)
SCAL Members: $232.00
Non-Members: $305.60
Register
Replacement/Postponement
A notice of replacement / postponement together with the full particulars of the new participant (for replacement) must be given to us AT LEAST 3 working days before course commencement. A charge of S$50 (replacement) or S$100 (postponement) will be imposed on such changes. Appeal of Assessment Result: (a) Students who wish to appeal for review of assessment results, please fill the Assessment Appeal Form that can be downloaded from website. There will be an admin fee of $60.00 (incl GST, non-refundable).
Special Class
Available upon request.
For more information, please contact Ms Gina at 67978779 or email gina@scal-academy.com.sg
“The training provided by SCAL’s experienced and knowledgeable trainers has equipped me with an excellent grasp of construction safety and allowed me to enhance worksite safety in Woh Hup”
“The course content is very relevant to my daily work and I will definitely recommend this course to my colleagues with design background at SCAL Academy.”
“SCAL Academy has a good understanding of how the industry works and the training is much better aligned with practical needs. The trainer also exhibited fantastic content knowledge and this enabled me to apply the concepts to my work.””
